Jan 28, 2011

Deconstructing

These don't count as part of the 365, because they have essentially zero artistic merit. Not that all my 365 pictures will, but I am making some effort there.

I mentioned recently that I had to replace a valve in the bathroom. Anyone who is a homeowner knows precisely how projects tend to snowball and then avalanche. I'll lay out a rough timeline on this one...

Early December 2010: notice that the toilet supply shut-off valve has a drop of water on it. Wipe it up, think nothing of it. A few days later there is another drip. Put it on the mental to-do list. I was winding down my year of night shift, and doing anything house-related was pretty far down my list of priorities.

Fast forward to two weeks ago. Step into the bathroom to do a load of laundry, and my feet get wet. Initial presumption is that the damn cats have pushed their water dish around again. Further checking reveals that no, the water bowl has no more spilled out than normal (Boris loves to dip his paw in the water and then shake it off) and the source of my wet feet is water coming up between the tiles.

Fie and doom.

I figured out what pieces I'd need and went downstairs to shut off the bathroom water. Revelation: no one installed isolation shut-offs for each room. In order to replace the toilet valve I had to shut off water to the whole house, and drain the plumbing. Since things had to get drained down that far, I decided to install a shutoff in the bathroom supply line as well.

Drive to Lowe's. Get all appropriate pieces. Return home. Replace supply valve and line on toilet. Take a deep breath, cut into supply line in cellar. Sweat on one side of the valve. Second side won't sweat properly. After several tries I gave in and called Dad for help. He showed up, figured out where the issue was, and in the process of trying to get the core out - tore the gasket. Back to Lowe's for a new valve.

Successfully sweated that in, turned on the water, and had a functional and non-leaking toilet. Of course, the tiles were now peeling up from the bathroom floor...

MrsZ and I spent some time at Lowe's looking at flooring options, and decided on vinyl tile. With some prompting, she picked a pattern we could both live with. Since we had to tear out everything in there to redo the floor, we decided to buy a gallon of paint and cover over the dark-blue walls at the same time. On top of that, since everything will be out of the way, we decided to replace the washing machine that has been of questionable reliability. (It gets the clothes clean but makes some awfully funny noises in the process.)

We bought tile and paint the other night, along with the glue and grout that we'll need, and ordered our new washing machine from Home Depot. Last night we got home and removed all the fixtures from the walls (sundry cabinet, medicine cabinet, towel bar, TP roll, and all the wall plates), shut off the water, pulled out the sink, vanity, and toilet, and I ripped up two thirds of the underlayment (which was starting to delaminate where it got wet) and pulled those nails.

We went from this (during our structural inspection):
IMG_2156
IMG_2159

To this, as of last night:
IMG_0143
IMG_0142

Tonight, I'll be pulling out the washer and dryer, and stripping out the remaining underlayment, prying up the nails, mopping with dilute bleach, and hopefully getting the walls sanded in preparation for priming.

Being a homeowner is FUN.

Jan 25, 2011

When I add someone to the 'roll, I tend to skim back through their posts to see what other gems I've missed. In doing that with Adaptive Curmudgeon, I found the Ford Earthfucker ... actually ... well ... Earthfucking (scroll down a bit).

Folks, that's the kind of thing you don't often see in the wild.

Jan 24, 2011

Handy, man.

Adaptive Curmudgeon is starting what sounds to be a pretty good tale of furnace woes. I can understand; even relate.

Reading that, combined with my own ongoing de-/re-construction efforts, I have reached the following conclusion: Everything is easier with the right tools - and even more so if you know how to use them.

I don't think everyone needs a fully-equipped machine- and wood-shop in their basement or garage. Goodness knows it would keep the ER's and Ambulance Drivers busy. I do, however, think that every single home should have a minimum of essential tools, and at least one person that knows how to use them. If you live alone, you are nominated by default.

None of these need to be expensive. In fact, I'll bet that you can acquire the vast majority of this list for under $200 total - and that's buying quality tools, not from the $0.99 bin at Walmart.

First bit of advice: spend the extra money for better tools. Craftsman (Sears) has a no-questions-asked lifetime warranty on their hand tools. Break it, they replace it. Period. It's worth the extra few bucks to get that warranty. Kobalt (Lowes) also makes pretty solid hand tools. If you're feeling wealthy, I suppose you can look to Snap-On or Mac, but there's really no need. Power tools? I fall squarely in the Dewalt camp. They take a heck of a beating; there's a reason you see yellow tools on construction sites.

So. Bare minimum you need to have:
- a set of screwdrivers. Flat and phillips, a couple different sizes. Buying a pre-compiled set for $10-15 is worth it.
- a hammer. A plain old 16oz claw hammer. Bet it costs you $8, maybe $10.
- a slip-joint pliers. Nothing fancy here.
- two crescent wrenches. One 6" and one 8".
- a 12' tape measure
- a drill/driver of some kind. Cordless are convenient but only if you remember to keep the battery charged. Corded are less convenient but cheaper and never have dead batteries.
- a set of drill bits
- a 24" spirit level
- duct tape

That's it. That's the bare minimum. You can do 90% of home projects with those tools. I'd strongly suggest adding to the list, though.

- a set of allen (hex) wrenches
- a socket set, with SAE and metric sockets
- needle-nose pliers
- water-pump pliers
- wirecutters (dikes and/or lineman's pliers)
- another 6" crescent wrench, and a 10" crescent wrench
- a 16" cross-cut saw
- a hacksaw
- a drywall saw
- a chalk line
- a combi-square
- a set of box or combination wrenches (SAE and metric)
- electrical tape

Now that wasn't so bad, was it? Only one power tool in the bunch! If you want to start adding power tools, I'd hold off until you have a project in mind that actually needs them. My most-used power tools are my drill and my circular saw, with the jigsaw being a distant third, and the nailers way down the list.

Of course, even if you have spent the money for "one of everything, please", that doesn't mean a damn if you can't USE what you have. Learn to use things properly and safely. Use the right tool for the job. Eye and ear protection is critical, and gloves aren't a bad idea.

Once you've got all that ... dig in. Don't be afraid to screw up. I've ended up chucking plenty of materials by making mistakes. It's not the end of the world, so long as you learn from what you're doing. I get cranky when I screw up. It costs money and time. But I don't make the same mistake again, either.

Of course, there will be times when it's time to call in a pro. In my case, 90% of the time, that means calling my father. I learned the vast majority of what I know by watching and working with him, and I can't ever thank him enough for letting me "help" as a kid.

Last week I had to replace a valve in our bathroom, which should have been a relatively simple project. Since I had to shut off water for the house anyways, I decided to add in a shutoff for just that room while things were down. I ended up not being able to get the joint to sweat properly, and after I tried several times, I gave in and called Dad.

He came over, looked over what I'd done, figured out the problem, and was also unable to correct it with what we had on-hand. One trip down to Lowes later, we had the parts we needed, and things were back together. I learned where my mistake was and what to do in the future, and got to spend a bit more time with my father. Win-win-win.

Be a handyman. Be willing to take on your own problems. And be willing to admit when a problem is over your head.

Writer's blockbuster

"Eateries that operate within the designated square downstairs count as food court. Anything outside, of said designated sqaure, counts as an autonomous unit for mid-mall snacking."

-- Mallrats, 1995

Discuss!