Apr 30, 2011

Day 2, mid-way wrap

MrsZ and I decided this morning, after breakfast, to try traffic and go to the show.

I'm glad we did. The drive in was MUCH easier, and while parking wasn't great, it wasn't half as bad as yesterday. (Cheaper, too, with weekend rates.)

Show wandering commenced - many more people, longer lines here and there, and I stuck to the "Upper Level" exhibit hall today. Tomorrow we'll try the main floor.

I waited in line about 15 minutes for a signature from R. Lee Ermey, then wandered off as the line had only moved about ten feet. He was taking time for a few words with everyone who came to him, posing for pictures, and so forth. I respect and appreciate that, but it wasn't worth the wait for me. (Weerd apparently caught him in the men's room; you'll have to ask HIM for that story.)

I moseyed on to the Beretta booth, where they had a simunition/laser range setup with their PX4 Storm pistols. Very nice little piece of equipment, even though I'm not in love with the DA/SA trigger arrangement. They're looking like they're in the mid-$500 range on Gallery of Guns, which is entirely reasonable.

I wandered by Taurus/Rossi's and played with the Ranch Hand - nice little piece of kit, and in .357 that could be a heck of a truck gun. I want one as a matter of course, anyways.

IMG_0305


Over by Ruger again and this time I managed to keep my pictures of the SR1911. We'll have to see how it shakes out from real range reports, but I expect it will give the Springer RO a strong run - stainless and US-made is worth a small price premium to a lot of folks. I'm also a fan of the relatively minimal stamping/engraving on the slide. The new Scout Rifle has a wonderful feel to it, and with the right scope (they had a Leupold 1.5-4x on theirs) it's a great all-purpose gun.

IMG_0307

IMG_0308

IMG_0309

Somehow, though, this has turned into a knife show for me. Yesterday I bought the Izula and Stone River knives, and today I picked up a few selections from Ka-Bar.

IMG_0311

In the back are the Stone River ceramic kitchen knives, the Big Honkin' Knife is a Ka-Bar Potbelly, the small one to the left of that is a made-in-China "Ka-Bar" knife that came with the Potbelly, the flat black folder is a Ka-Bar Fin, and in front is the ESEE Izula with the ESEE Fire Kit.

And now that MrsZ is about done doing herself up, we're off to gunnie prom!

Barn, foundation

I finally got all the footers dug, set, and leveled - half-tabs of asphalt shingles are just the right size to make shims for 8x16 concrete blocks. Sixteen footers, roughly 3'6" spacing - I eyeballed them, as these don't have to be exact (they'll be well inside the outer edges of the barn on three sides; the fourth side I was careful about).

IMG_0269


Once the footers were set, I laid out the skids and tacked them together. Sadly, a framing nailer is NOT easy to use with the framing plates - it's just too tough to line up the nail and the hole. After jamming my nailer more than once, I went back to good old-fashioned hammering and had the job done in no time. The far area - the 12x4' open area - will be the goats' stall, with a bare-dirt floor. The near area, with the 8' 4x4 skids, will be floored, and one third will become a chicken coop, while the remaining two thirds will be storage and work space for MrsZ's hobbies.

IMG_0270


Next step: joists, then flooring and walls!

Apr 29, 2011

Day 1, wrap up

Good grief, what a day. I ended up bailing on the Happy Hour at Tilted Kilt sponsored by Crimson Trace far earlier than I might have - I was exhausted, the restaurant was loud, and I'd had my fill of people. Sometimes being a bit introverted can be unpleasant, but I've generally learned to heed the little voice on my shoulder that says, "Hey, enough. Time to bail."

So, the day, in rough order of events:
MrsZ and I caught up with Newbius and his wife for breakfast in the hotel. MrsZ stayed at the hotel for the day, I carpooled in to the show with Newbius and his wife. 13 miles - 1:40 from hotel door to parked. Pittsburgh has NO idea how to handle this kind of event. Traffic was a mess, parking was a disaster, and I heard lots of mutters around the show about commute times etc. It was bad enough that I'm debating whether or not I really want to go back to the show tomorrow. (I will go again Sunday, but we may just be lazy tourists tomorrow.)

We walked the four blocks from our parking lot to the convention center, found the media room, got our credentials, and headed for the show floor. I wandered on my own for the better part of the day, with occasional stops back in the media room to see who had accumulated, or just to sit down and have a cup of coffee for a moment.

In no particular order, the things that caught my attention, for good or bad:
The Smith & Wesson M&P 22. If you carry an M&P as a duty or personal weapon, this should be a no-brainer. Size and weight are similar to a standard center-fire M&P, manual of arms is identical. With an MSRP of $419, expect to see these on the street for $350-375ish. Reliability, of course, remains to be seen, but given S&W's reputation for standing behind their products, I have high hopes for this one.

IMG_0271


The Remington Centennial 1911R1. I like Remington products, generally speaking. I swear by their 870 series of shotguns, and clay- and wing-shooters alike will sing the praises of the 11xx series autoloaders. This just seems ... misguided. It's a government-size 1911A1, with three-dot sights, a lowered/flared ejection port, stainless barrel, flat MSH, GI beavertail, etc. The grips are coarse-checkered wood of some kind, and the checkering is aggressive enough that simply holding the gun was unpleasant. Shooting it with anything resembling a full-house load would be painful. There's a touch of engraved scrollwork on the slide that strikes me as an afterthought more than anything else. With an MSRP of $1250, I expected more from Big Green.

IMG_0274


On the flip side of that coin, however, Remington may have cracked one out of the park with the new VersaMax autoloader. A series of gas ports self-adjusts the amount of gas vented or cycled to the action, meaning it (at least in theory) can go from light 2-3/4" trap loads to high-brass field loads or 3-1/2" waterfowl loads with no adjustments to the gas system. Major-plus features in my book are the large button to disengage the safety (a treat for waterfowlers wearing gloves in the blind - no need to fumble that tiny button!), a vent-rib with checkered top to reduce glare, and twin beads to help alignment. Shouldering feels much like the 870; I had to make one tiny adjustment the first time I brought the gun up and then it was like it was made for me.

IMG_0276

IMG_0277


Kimber has just released their new "Solo Carry" compact 9mm. Initial impression: if you're used to the 1911 manual of arms, or don't like the idea of a gun with no manual safety, this may be an ideal alternative to the Kahr PM9/Ruger LC9, etc. Fit and finish is, as expected, excellent, and the gun points well. If anything, I think the grip is a bit too narrow, but that's easy enough to beef up with some new panels. Some stippling or checkering on the fore- and back-straps would go a long way towards grip as well.

IMG_0282


Chiappa Firearms has a few real beauties out this year. The Rhino remains an ugly duckling, but I won't denigrate it for ugly. They have a lever-action pistol out, a la the Rossi "Ranch Hand" series; their show model was chambered in .44-40. Perhaps of more interest to many, however, are the new "Plinkerton" series of single-action revolvers. All chambered in .22LR, they are available in several finishes and barrel lengths, and, depending on price, could be wonderful "fun" guns - potentially giving the Single Six a good run for its money.

IMG_0294

IMG_0296


Tactical Solutions had a nice setup, with their products mounted on several Browning Buckmark lowers and Ruger MkIII lowers. Thanks to Ruger serializing the barrel on the MkIII series, a TS upper means going through an FFL; the Browning barrels were available at the show. I asked one of their booth guys for advice on how best to disassemble and reassemble a MkIII; he provided me with a few tips that I'll explore when I get home.

IMG_0278

IMG_0281


Springfield Armory had an extensive display of XD, XDm, M1A, and 1911 pistols. I poked at their recently-released "Range Officer" model and was not wildly impressed. For the price - they're running $7-800 on GunBroker right now - you should be able to get into a Ruger SR1911, which I think will be a far better value.

IMG_0298


Ithaca Gun had a display of their shotguns and 1911s. The shotguns look halfway decent but are, of course, not as buttery-smooth as a gun that's been used for fifty years. The 1911 I tried had a trigger pull in excess of 10 pounds (by my rough guestimation), which is FAR too heavy for ANY single-action sear. Also, I'm biased, and seeing "Ithaca Gun Co, Upper Sandusky OH" just rubs me wrong.

Other things of interest... Silver Stag knives are pretty, but their managing partner is rude. I'm not a knife guy, I'm a gun guy, and I don't know all the gun makers out there. No way I'm going to know all the knife folks out there! Don't be insulted if someone doesn't know your name, treat them as a potential new customer!

I *did* buy a set of ceramic kitchen knives from the folks at Stone River; show pricing ($75) and some fondling convinced me to take a chance on them.

I also picked up an ESEE Izula (in pink!) and Fire Kit from the folks at EMGear. Yes, pink. The other options were black, tan, and olive green. If I dropped one of those in the yard, I'd find it when the lawnmower did. At least I have a small chance of finding a pink knife!

My own mistake ate several of the pictures I took today - so there are some things missing I wanted to show y'all. I'll try to re-take the important stuff before I come home!

Gunnie prom tomorrow, looking forward to seeing y'all some more!

Show quick notes

First, this thing is huge. I think I've seen it all and then turn a corner and find a whole new area I haven't seen.

Most of the exhibits are happy to answer any questions I've had - with special thanks to Tactical Solutions for several tips on tearing down and reassembling my 22/45.

A moderate dart at Silver Stag knives, whose representative seemed horribly offended that I'd never heard of their product line - admittedly beautiful stag-handled knives.

Nothing truly revolutionary has caught my eye, but lots of nice evolutions. The Ruger SR1911looks great, as does the Kimber Solo Carry. Chiappa has some nice new single-action rimfires and cowboy guns.

Remington: VersaMax is gorgeous. Want. The centennial R1911, however, is a pig. With lipstick. Ugly grips that are actually painful to hold, and engraving that seems like an afterthought.

More later, and pictures!

Safety at the Show

Wandering the floor and stopped by the Crimson Trace booth. Played with a nice set of grips after clearing the gun. Sales rep sidled over and told me I was the first one he'd seen clear a gun yet. Rule One, kids. Rule One.